Showing 37–72 of 176 results

Pusled kandilised

46,82 
Läikiv kartong polümeerkattega
EAN:0

Pusled kandilised

22,95 
Läikiv kartong polümeerkattega
EAN:0

Pusled kandilised

22,95 
Läikiv kartong polümeerkattega
EAN:0

Pusled kandilised

47,84 
Läikiv kartong polümeerkattega
EAN:0

Pusled kandilised

25,40 
Läikiv kartong polümeerkattega
EAN:0

Pusled kandilised

46,82 
Läikiv kartong polümeerkattega
EAN:0

Pusled südamekujulised

52,94 
Pusled südamekujulised

läikiv kartong polümeerkattega
EAN:0

Pusled südamekujulised

24,99 
Pusled südamekujulised

läikiv kartong polümeerkattega
EAN:0

Pusled südamekujulised

22,95 
Pusled südamekujulised

läikiv kartong polümeerkattega
EAN:0

Pusled ümmargused \(200mm, 45tk\) pakk 10tk

21,93 
Läikiv kartong polümeerkattega
EAN:0

Pusled visiitkaartidega

22,95 
Pusled visiitkaartidega
\(190х280mm, 15 kaarte 49х62mm\)

pakk 10tk
EAN:0

Secabo 300mm Rod

25,32 
Secabo cross laser modular accessory systemFixing rod 300 mm long
EAN:PIGU35288116

Secabo 500mm Rod

34,47 
Secabo cross laser modular accessory systemFixing rod 500 mm long
EAN:PIGU35288116

Secabo Accessory Holder

39,65 
Secabo Cross Laser Modular Accessory SystemAccessory Holder for Joint Bars or Abaleg Module HolderNaturally, Secabo has developed another innovative new feature for you that makes working with the cross laser even easier\.The Secabo Accessory Holder - it can be easily clamped to the transfer press with the Secabo Quick Change System\.This of course works with almost all Secabo transfer presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7\.In addition, you can also attach the new Secabo Storage Tray, also developed by Secabo, and thus store your transfers directly at the press neatly and sorted\.
EAN:PIGU35288116

Secabo Adapter for base plate and quick-change-system Secabo TC5 SMART and TC7 SMART

89,47 
Adapter to connect the original base plate of the transfer presses TC5 SMART or TC7 SMART with the matching quick-change system\. Also suitable for the slide extension\. With this adapter, the base plate can then also be replaced as a removable plate in seconds\. The special beam technology allows textiles to be coated over the base plate\.
EAN:PIGU35288116

Secabo adjusting screw TS7 quickcoupler

71,17 
Secabo adjusting screw, which, in conjunction with the TS7 quick coupler, enables better access to the height adjustment for the base plate\. The use of this additional product is strongly recommended when using the quick change system on a Secabo TS7 transfer press\.
EAN:PIGU35288116

Secabo badge die for 50mm badges

171,82 
Button tool set for the production of 50mm buttons/badges\. Suitable for replacement or extension of a Secabo badgemaking machine\.
EAN:PIGU35288116

Secabo badge die for 75mm badges

211,47 
Button tool set for the production of 75mm buttons/badges\. Suitable for replacement or extension of a Secabo badgemaking machine\.
EAN:PIGU35288116

Secabo badge die for rectangular badges

432,08 
Button tool set for the production of rectangular buttons/badges\. 37mm x 58mm\. Suitable for replacement or extension of a Secabo badgemaking machine\.
EAN:PIGU35288116

Secabo base plate 40cm x 50cm for SMART

202,32 
Transfer press base plate with a working surface 40cm x 50cm for use with the Secabo adapter for base plate and S\.-W\. Secabo TC5 SMART and TC7 SMART\.The plate is intended as an additional base plate for e\.g\. a TC7 SMART transfer press with Slide extension\.The matching adapter is not included in the delivery and is optionally available: Art\. No\. 109\.505\.311
EAN:PIGU35288116

Secabo beam-adapter for base plate TC5, TPD7

89,47 
Adapter to equip the original base plate of the Secabo TC5 and TPD7 transfer presses with the special beam technology\. This enables the convenient transfer of textiles via the base plate\. The overlay adapter is mounted directly on the base of the respective TC5 or TPD7 press\. In order to use the original base plate of the transfer press TC5 or TPD7 with the quick-change system, the adapter "Adapter for base plate and S\.-W\. Secabo TC5, TS7" \(item no\. 109\.505\.30\) is required for the Secabo TC5 and the adapter "Adapter for base plate and S\.-W\. Secabo TC7, TPD7" \(item no\. 109\.505\.31\) for the Secabo TPD7\. These are optionally available in our YOW! Store available\.
EAN:PIGU35288116

Secabo button molding set 25mm

140,30 
Button die set for button making, 25mm version, suitable for YOW! button making machine\.
EAN:PIGU35288116

Secabo button molding set 37mm

140,30 
Button tool set for the production of buttons/badges\. 37mm\. Suitable for replacement or extension of a Secabo badgemaking machine\.
EAN:PIGU35288116

Secabo button molding set oval

432,08 
Button tool set for the production of ovale buttons/badges 45mm x 69mm\. Suitable for replacement or extension of a Secabo badgemaking machine\.
EAN:PIGU35288116

Secabo C120 V vinyl cutter

1676,48 
High cutting quality and precision make the Secabo C120 V cutting plotter a reliable universal partner\. With its stepper motor, all common materials in advertising technology can be processed\. The cutting plotter is designed for a maximum cutting width of 126cm and a maximum media width of 135cm\. The model presents itself with completely new, comfortable menu and user guidance and in an independent design\. The software uses the successful LAPOS contour cutting function as well as the supplied cutting software DrawCut LITE for Windows\. A sturdy base with roll holder is also included\.


Easy installation on PC, no additional drivers required

Precise cutting even with small fonts

Sturdy stand with roller holder included

LAPOS2 Contour cut function

DrawCut LITE for Windows included in delivery

Compatible with SignCut for Mac, no LAPOS
EAN:PIGU35288116

Secabo C120IV vinyl cutter with LAPOS2

1189,50 
The cutting plotters of the CIV series from Secabo are a logical further development of the well-known CIII cutting plotter series from Secabo\. The use of the Secabo C120IV cutting plotter is possible due to the improved cutting quality as well as higher reliability and precision in almost all professional areas of the advertising technology\. With a cutting width of up to 126cm, the C120IV cutting plotter can handle even large jobs and high volumes\. With its stepper motor, all common materials such as adhesive films, self-adhesive films, flock films, flex films, stencil films, paper, cardboard etc\. in widths up to 135 cm can be processed with the new Secabo C120IV cutting plotter\. The large illuminated display as well as the large buttons allow easy operation of the Secabo C120IV cutting plotter, with the improved LAPOS2 technology, printed films can be cut precisely to the contour\. The C120IV cutting plotter is controlled comfortably via the provided cutting software DrawCut LITE\. Also included with the cutting plotter is a sturdy base with roll holder\.


Easy installation on PC, no additional drivers required

Error-free plotting even with extensive plots

Common lowering of all pinch rollers via a central lever

Precise cutting even with small fonts

LAPOS2 Contour cut function
EAN:PIGU35288116

Secabo C30IV vinyl cutter with LAPOS2

608,98 
The cutting plotters of the CIV series from Secabo are a consistent further development of the well-known CIII cutting plotter series from Secabo\. The improved cutting quality as well as higher reliability and precision allow the use of the Secabo cutting plotter in almost all professional areas of signmaking\. With a cutting width of up to 33cm, the C30IV cutting plotter can handle even large jobs and high volumes\. With its stepper motor, all common materials such as adhesive films, self-adhesive films, flock films, flex films, stencil films, paper, cardboard, etc\. in widths up to 42cm can be processed with the new Secabo C30IV cutting plotter\. The large illuminated display as well as the large buttons allow an easy operation of the Secabo C30IV cutting plotter, with the improved LAPOS2 technology printed foils can be cut with contour accuracy\. The C30IV cutting plotter is controlled comfortably via the supplied cutting software DrawCut LITE for Windows\.


Easy installation on PC, no additional drivers required

Common lowering of all pinch rollers via a central lever

Precise cutting even with small fonts

Multilingual cutting software DrawCut LITE for Windows included
EAN:PIGU35288116

Secabo C5 Clam transfer press 38cm x 38cm

64800,00 
With the C5 Clam, Secabo has the right transfer press for entry into textile finishing and other transfer technologies\. With the folding press all common hot transfer methods \(flock, flex, sublimation, etc\.\) can be performed\. With the digital controller for temperature and time, the desired settings can be made quickly and easily\. The pressure is adjusted via a handy handwheel\. The Secabo C5 Clam has a working surface of 38cm x 38cm\.


Cheap heat press for beginners

Large work surface of 38cm x 38cm

Digital controller for temperature and time

Easily adjustable contact pressure
EAN:PIGU35288116

Secabo C60 V vinyl cutter

1270,83 
High cutting quality and precision make the Secabo C60 V vinyl cutter a reliable universal partner\. With its stepper motor, all common materials in advertising technology can be processed\. The cutter is designed for a maximum cutting width of 61cm and a maximum media width of 72cm\. The plotter presents itself with completely new, comfortable menu and user guidance and in an independent design\. The successful LAPOS contour cut function and the included DrawCut LITE cutting software for Windows are used\. A stable stand with a roll holder is also included\.


Easy installation on PC, no additional drivers required

Precise cutting even with small fonts

Sturdy stand with roller holder included

LAPOS2 Contour cut function

DrawCut LITE for Windows included in delivery

Compatible with SignCut for Mac, no LAPOS
EAN:PIGU35288116

Secabo C60IV vinyl cutter with LAPOS2

759,45 
The cutting plotters of the CIV series from Secabo are a consistent further development of the well-known CIII cutting plotter series from Secabo\. The use of the Secabo C60IV cutting plotter is possible in almost all professional areas of signmaking due to the improved cutting quality as well as higher reliability and precision\. With a cutting width of up to 61cm, the C60IV cutting plotter can handle even large jobs and high quantities\. With its stepper motor, all common materials such as adhesive films, self-adhesive films, flock films, flex films, stencil films, paper, cardboard, etc\. in widths up to 72cm can be processed with the new Secabo C60IV cutting plotter\. The large illuminated display as well as the large buttons allow an easy operation of the Secabo C60IV cutting plotter, with the improved LAPOS2 technology printed films can be cut with contour accuracy\. The C60IV cutting plotter is conveniently controlled via the supplied DrawCut LITE cutting software\. The practical stand with roll holder is optionally available\.


Easy installation on PC, no additional drivers required

Error-free plotting even with extensive plots

Common lowering of all pinch rollers via a central lever

Precise cutting even with small fonts

LAPOS2 Contour cut function
EAN:PIGU35288116

Secabo circular removable plate 15 cm for Secabo transfer presses

136,23 
Thanks to its circular shape, the Secabo removable plate with cm15 cm can be used ideally for complicated objects with special requirements, in particular plates, plates and similar transfer objects\. Suitable for the Secabo heat press models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7 / TS7 SMART\. The optional mounting kit is required for use without a quick-change system\. With TPD7, TPD7 PREMIUM and TS7 can only be installed when used with a quick coupler\. With a Secabo quick coupler, the removable plate can be replaced in seconds and allows objects to be pressed in the smallest possible area\. This protects surfaces and other transfers\.
EAN:PIGU35288116

Secabo CL01 and base TC5 Lite and TC7 Lite

507,32 
Set consisting of Secabo CL01 controller and the mechanical base for TC5 Lite and TC7 Lite\.
EAN:PIGU35288116

Secabo CL01

181,98 
Secabo CL01- TC5 Lite, TC7 Lite, TS5 Lite
EAN:PIGU35288116

Secabo Crosslaser Basic Unit

151,48 
With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers, etc\. can be positioned easily and reproducibly\.
EAN:PIGU35288116

Secabo DrawCut EXPERT cutting software single license

569,33 
DrawCut EXPERT is a software package that provides a complete solution for all sign and label creation needs\. It's packed with tools and features to design and plot foil fonts, stickers or textile finishes, as well as everything you need to create banners, posters, flags and more\. The choice of tools and effects for text, objects, and curves in DrawCut EXPERT is unmatched in comparable applications\. With DrawCut EXPERT you will be independent of applications like CorelDraw, Adobe Illustrator and others\. DrawCut EXPERT is also available as an upgrade from DrawCut LITE and PRO\. DrawCut EXPERT supports many popular vinyl cutters of well-known brands\. After the order process, you will receive a code with your invoice that you can use to download your DrawCut EXPERT at https://buy\.draw-cut\.com/\?edition=4\. Here, the payment is made by "Voucher" with the code that you find on your bill\. You will then receive your DrawCut EXPERT serial number by email, which will allow you to download and install DrawCut EXPERT at www\.draw-cut\.com\. Software products are generally excluded from return\.
EAN:PIGU35288116

Secabo DrawCut LITE cutting software single license

181,98 
DrawCut LITE can control the cutting plotters of the Secabo CIII, CIV and S series\. DrawCut LITE has extensive functions for designing, drawing, arranging objects and creating texts\. In addition, DrawCut LITE installs, calibrates and controls your Secabo cutting plotter comfortably and with many clear wizards and simple functions\. After the order process you will receive a code with your invoice which you can use to download your DrawCut LITE from http://buy\.draw-cut\.com/\?edition=1\. Payment is made by "voucher" with the code that you will find on your invoice\. You will then receive your DrawCut LITE serial number by email, which you can use to download and install DrawCut LITE from www\.draw-cut\.com\. Software products are generally excluded from being returned\.
EAN:PIGU35288116