Paldiski mnt.26A, Tallinn
+372 50 64 135
Топ продаж
Новые товары
Жидкость для внутренней очистки печатающих головок OCP Yellow, 250ml
Print head Cleaning liquid instructions\.
Replaceable print heads \(Hewlett Packard, some Lexmark series, Canon 2000 / 4000 / 5000 series\)\.
Some contaminations:
Soak the towel in the unclog printhead liquid and leave the print head \(on the towel\) in position like inside the printer for 15-30 minutes \(maximum 2 hours\)
after that period wipe near exhaust nozzles using a piece of cloth\.
Large contaminations:
Fill the flat dish with liquid and put the print head in position like inside the printer for up to 12 hours
CAUTION:
Do not sink the cartridge in the liquid at the level as the print head nozzles are located\. It may damage \(separate\) plastic parts of the cartridge\. Internal liquid may be injected inside the cartridge\. We receive the best effectiveness when liquid will be heated to temperature 55 °C\. It is very important not to cross that temperature\. Because the electronic plates are stuck, too large temperature of solution may cause plates unstick and also cartridge electronic damage\.Injecting liquid inside the cartridge it is necessary to remember to suck off using syringe with suction device after about 10 minutes\.
CAUTION:
We receive the largest effectiveness when the liquid is heated to 55 °C\. Don´t cross that temperature\.
Procedures with solid print heads \(Epson models\)\.
Proceed according to the following recommendations:
Start printing
During printing, take out plug from power cord \(the print head should be in a central position\)
Cut out a piece of cloth in the shape of print head
A piece of cloth must be soaked with liquid
put it on the park place \(usually at the right side of the printer\)
Shift the print head in the park position
Wait about 30 minutes
Remove a piece of cloth
Plug the printer in\.
Replaceable print heads \(Hewlett Packard, some Lexmark series, Canon 2000 / 4000 / 5000 series\)\.
Some contaminations:
Soak the towel in the unclog printhead liquid and leave the print head \(on the towel\) in position like inside the printer for 15-30 minutes \(maximum 2 hours\)
after that period wipe near exhaust nozzles using a piece of cloth\.
Large contaminations:
Fill the flat dish with liquid and put the print head in position like inside the printer for up to 12 hours
CAUTION:
Do not sink the cartridge in the liquid at the level as the print head nozzles are located\. It may damage \(separate\) plastic parts of the cartridge\. Internal liquid may be injected inside the cartridge\. We receive the best effectiveness when liquid will be heated to temperature 55 °C\. It is very important not to cross that temperature\. Because the electronic plates are stuck, too large temperature of solution may cause plates unstick and also cartridge electronic damage\.Injecting liquid inside the cartridge it is necessary to remember to suck off using syringe with suction device after about 10 minutes\.
CAUTION:
We receive the largest effectiveness when the liquid is heated to 55 °C\. Don´t cross that temperature\.
Procedures with solid print heads \(Epson models\)\.
Proceed according to the following recommendations:
Start printing
During printing, take out plug from power cord \(the print head should be in a central position\)
Cut out a piece of cloth in the shape of print head
A piece of cloth must be soaked with liquid
put it on the park place \(usually at the right side of the printer\)
Shift the print head in the park position
Wait about 30 minutes
Remove a piece of cloth
Plug the printer in\.
EAN:0
Secabo TC5 LITE modular transfer press 38cm x 38cm
Best performance and high comfort with the Secabo LITE series - With this new development of the successful Secabo TC5 toggle press, Secabo is launching a lucrative modular system that opens up a host of new possibilities for users\. A plus in flexibility due to easily exchangeable components, in short a basic product with great upgrade options\. The new LITE models therefore have the advantage of being able to upgrade individual base plates or heating plates as needed in a cost-saving manner and to easily exchange components\. Secabo's TC5 LITE transfer press is a modular automatic opening toggle press\. The user does not have to wait next to the press during transfers, but can pursue other activities\. After the set time has elapsed, the press opens automatically and announces this three seconds in advance with an acoustic signal\. The pressing process can be interrupted at any time at the push of a button - for example to prepress textiles\. Temperature and pressing time are conveniently preselected via a digital controller\. The pressing pressure is set via a large handwheel on the top of the heating plate\. The TC5 LITE heat press, with a work surface of 38cm x 38cm, has an additional cover plate on the heating plate to protect the user from burns\. The construction of the TC5 LITE is fully modular, control unit, heating plate, base plate and base frame can be disassembled and exchanged in a few simple steps\. This also allows the use of other heating plates, for example\. The LITE transfer presses offer everything that makes textile transfers with Secabo so convenient\. All professional applications of the common hot transfer processes such as flock foils, flex foils, sublimation, InkJet-Flex, etc\. are of course possible\. The Secabo TC5 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system as well as a slide extension for use as a double plate press\. Furthermore, with the TC5 LITE you also have the possibility to upgrade to our Secabo TC-SMART series\.
Transfer press opens automatically after the time has elapsed
Digital controller for temperature and time
Temperature \(max\. 250°C\) and time adjustable on controller via arrow keys
Modular design, components can be easily exchanged
Upgrade to Secabo SMART version possible at any time
Easily adjustable contact pressure
High quality heating plate with additional protection plate
Suitable for all common transfer processes
Can be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even more productivity
Transfer press opens automatically after the time has elapsed
Digital controller for temperature and time
Temperature \(max\. 250°C\) and time adjustable on controller via arrow keys
Modular design, components can be easily exchanged
Upgrade to Secabo SMART version possible at any time
Easily adjustable contact pressure
High quality heating plate with additional protection plate
Suitable for all common transfer processes
Can be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even more productivity
EAN:PIGU35288116
