Paldiski mnt.26A, Tallinn
+372 50 64 135Kross laser
Adapter for base plate and quick-change-system Secabo TC7 and TPD7
Adapter to connect the original base plate of the heat presses and TC7 TPD7 with the appropriate quick-change system\. In TC7 also suitable for the slide-extension\. With this adapter, the base plate can also be replaced as a removable drive in seconds\. The special beam technology allows doing the coating of textiles to the base plate\.
EAN:PIGU35288116
Secabo Adapter for base plate and quick-change-system Secabo TC5 SMART and TC7 SMART
Adapter to connect the original base plate of the transfer presses TC5 SMART or TC7 SMART with the matching quick-change system\. Also suitable for the slide extension\. With this adapter, the base plate can then also be replaced as a removable plate in seconds\. The special beam technology allows textiles to be coated over the base plate\.
EAN:PIGU35288116
Secabo adjusting screw TS7 quickcoupler
Secabo beam-adapter for base plate TC5, TPD7
Adapter to equip the original base plate of the Secabo TC5 and TPD7 transfer presses with the special beam technology\. This enables the convenient transfer of textiles via the base plate\. The overlay adapter is mounted directly on the base of the respective TC5 or TPD7 press\. In order to use the original base plate of the transfer press TC5 or TPD7 with the quick-change system, the adapter "Adapter for base plate and S\.-W\. Secabo TC5, TS7" \(item no\. 109\.505\.30\) is required for the Secabo TC5 and the adapter "Adapter for base plate and S\.-W\. Secabo TC7, TPD7" \(item no\. 109\.505\.31\) for the Secabo TPD7\. These are optionally available in our YOW! Store available\.
EAN:PIGU35288116
Secabo modular double cross laser stand version with 4 x 500mm rod
This modular product has the following contents:2 × Secabo Crosslaser Basic Unit4 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Screws Bag for Transfer Extension ModulesDo you actually know how easy it is to use the new Secabo Crosslaser\? If you don't want to place the whole thing on your work table, but somewhere else, you can of course build a stand version with 3 additional 500mm or 300mm rods, so that the laser system can be conveniently placed somewhere else\. The double cross laser stand version, here you have the option to simply attach a second Laser-Basic Unit over a cross bar for even more precision\. With the 500mm long rod you can reach a larger area, so you can your textile, for example, on the chest and on the edge\. Here, of course, it helps to use a second laser and reduce the amount of work\. The decision is of course up to you, we make it possible!All products from the Secabo cross laser system can be extended on request and according to your needs\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo modular double cross laser table version with 2 x 500mm rod
This modular product has the following content:2 × Secabo Crosslaser Basic Unit2 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Fixed Joint Unit1 × Secabo Screws Bag for Transfer Extension Modules Do you actually know how easy it is to use the new Secabo Crosslaser\? The double cross laser table version, here we have the possibility to simply attach a second laser basic unit via a cross bar to achieve even more precision\. With the 500mm long rod you can reach a larger area, so that you your textile for example on the chest and on the edge\. Here, of course, it helps to use a second laser and reduce the amount of work\. Great thing, isn't it\? And if you don't want to place the whole thing on your work table, but somewhere else, you can of course build a stand version with 2 additional 500mm or 300mm rods, so that the laser system can also be conveniently placed somewhere else\.The decision is of course yours, we make it possible! All products from the Secabo cross laser system can be extended on request and according to your needs\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo modular double cross laser with accessory holder for quick coupler and storage module
This modular product has the following content:2 × Secabo Crosslaser Basic Unit1 × Secabo Accessory Holder2 × Secabo 500mm Rod1 x Secabo Fixed Joint Unit1 x Storage Tray 1 × Secabo Screws Bag for Transfer Extension Modules \+ Quick Change System for LITE and SMART Series\* \*The Secabo Quick Change System may vary by press model, is not included! Do you actually know how easy it is to use the new Secabo cross laser\? For example, the double cross laser you can attach directly to your heat press!With the Secabo Accessory Holder - it easily attaches to our quick change systemand then you have the fantastic option of attaching your laser to it\.This of course works with almost all Secabo heat presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7\. With the double cross laser version, which is attached directly to the transfer press, has possibility to simply attach a second laser basic unit via a cross bar to achieve even more precision\. With the 500mm long rod you can reach a larger area, so you can your textile, for example, on the chest and the edge\. Here, of course, it helps to use a second laser and reduce the amount of work\. The decision is of course yours, we make it possible!You can also easily attach the practical storage plate, the Secabo Storage Tray to your heat press\. Whether small tools such as cutters or scissors, as well as your transfers can be stored here\. Thus, the most important things for your workflow are always at hand and sorted\. All products of the Secabo cross laser system can be extended on request and according to your needs\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo modular single cross laser stand version with 3 x 500mm rod
This modular product has the following contents:1 × Secabo Crosslaser Basic Unit3 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Screws Bag for Transfer Extension ModulesDo you actually know how easy it is to use the new Secabo Crosslaser\? If you don't want to place the whole thing on your work table, but somewhere else, you can of course build a stand version with 3 additional 500mm or 300mm rods, so that the laser system can also be conveniently placed somewhere else\.The decision is of course yours, we make it possible! All products from the Secabo cross laser system can be extended on request and according to your needs\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo modular single cross laser table version with 500mm rod
This modular product has the following content:1 × Secabo Crosslaser Basic Unit1 × Secabo Stand Basic Unit1 × Secabo 500mm Rod1 × Secabo Screws Bag for Transfer Extension Modules Do you actually know how easy it is to use the new Secabo Crosslaser\? For example, the single cross laser table version\.Connect the base piece to the desired rod, available in 500mm or 300mm, of course you can vary the height that is comfortable for you\. Then clip on the laser diode and tighten it\. To make sure nothing bothers you, you can secure everything with the included cable ties and you're ready to go!The nice thing about the Secabo cross laser system is that you can now reorder more rods if you need more height, or even an intermediate rod for a second laser\. All products from the Secabo cross laser system can be expanded if desired and as needed\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo modular single cross laser with accessory holder for quick coupler
This modular product has the following content:1 × Secabo Crosslaser Basic Unit1 × Secabo Accessory Holder1 × Secabo 500mm Rod1 × Secabo Screws Bag for Transfer Extension Modules\+ Quick Change System for LITE and SMART Series\* \*The Secabo Quick Change System may vary by press model, is not included! Do you actually know how easy it is to use the new Secabo cross laser\? For example, the single cross laser you can attach directly to your heat press!With the Secabo Accessory Holder - it easily attaches to our quick change systemand then you have the fantastic option of attaching your laser to it\.This of course works with almost all Secabo heat presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7\. All products from the Secabo cross laser system can be extended on request and according to your needs\. Secabo cross laser modular accessory system for transfer pressesFor even more flexibility and precision in hot transfer: a cross laser suitable for all Secabo transfer presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing\. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and to achieve consistent results with higher print runs\. With Secabo's flexible cross lasers, textiles and other objects as well as transfer elements such as flex foils, sublimation papers and the like can be positioned easily and reproducibly\. Secabo has developed a modular system here that is suitable for almost all Secabo transfer presses\. Whether you want to use the table version, stand version or in combination with our Accessory Holder the laser directly at the transfer press\.Here your possibilities are extremely variable, because by the different bar lengths and cross bars you can adapt everything to your workplace accordingly\. The new laser can be focused even more precisely, which is particularly interesting for hot transfers in series production, as it makes it much easier to position the transfer objects exactly in almost all transfer press types\. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month warranty\. Features all transfer presses can be retrofitted with the cross laser systemmodular design for optimal workflowmore precise positioning due to exact laser focusdesk and floor standing version available Safety instructions!Do not look into the laser beamDo not look into the direct reflections of the laser beamDo not use at eye level\.
EAN:PIGU35288116
Secabo quick change system for exchangeable base plates
With the quick-change system - depending on the heat press model - up to three exchangeable base plates can be mounted on to the press and can be changed within a few seconds\. Available for the heat presses TC5, TC7, TPD7 \(up to 2 x 3 exchangeable base plates on 2 quick-change-systems\) and TS7\. Exchangeable base plates must be ordered separately\. Included is an adapter for mounting on the original base plate on the quick-change-system\. The special beam technology enables you to comfortably cover garments over the base plate\.
EAN:PIGU35288116
Secabo quick change system for Secabo TS7
With the quick-change system - depending on the heat press model - up to three exchangeable base plates can be mounted on to the press and can be changed within a few seconds\. Available for the heat presses TC5, TC7, TPD7 \(up to 2 x 3 exchangeable base plates on 2 quick-change-systems\) and TS7\. Exchangeable base plates must be ordered separately\. Included is an adapter for mounting on the original base plate on the quick-change-system\. The special beam technology enables you to comfortably cover garments over the base plate\.
EAN:PIGU35288116
Secabo quick release plate changer for LITE and SMART series
With the Secabo quick-change system, up to three exchange plates can be mounted next to each other - depending on the transfer press model - and exchanged in just a few seconds\. Available for the transfer presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, The BEAST and THE BEAST White Toner, excluding Secabo TCC SMART\. Exchangeable plates must be ordered separately\. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler\. The special beam technology of the adapter allows textiles to be comfortably pulled over the base plate\.
EAN:PIGU35288116
Secabo quick-change system for exchangeable base plates for TC 7
With the quick-change system - depending on the heat press model - up to three exchangeable base plates can be mounted on to the press and can be changed within a few seconds\. Available for the heat presses TC5, TC7, TPD7 \(up to 2 x 3 exchangeable base plates on 2 quick-change-systems\) and TS7\. Exchangeable base plates must be ordered separately\. Included is an adapter for mounting on the original base plate on the quick-change-system\. The special beam technology enables you to comfortably cover garments over the base plate\.
EAN:PIGU35288116
Secabo quick-change system for exchangeable base plates for TPD7
With the quick-change system - depending on the heat press model - up to three exchangeable base plates can be mounted on to the press and can be changed within a few seconds\. Available for the heat presses TC5, TC7, TPD7 \(up to 2 x 3 exchangeable base plates on 2 quick-change-systems\) and TS7\. Exchangeable base plates must be ordered separately\. Included is an adapter for mounting on the original base plate on the quick-change-system\. The special beam technology enables you to comfortably cover garments over the base plate\.
EAN:PIGU35288116
Secabo replaceable plates quick-changer for TPD7 PREMIUM
Depending on the transfer press model, up to three change plates can be mounted next to each other with the Secabo quick-change system and replaced in a few seconds\. Available for the transfer presses TC5, TC7, TPD7 and TPD7 PREMIUM \(up to 2 x 3 change plates for 2 quick couplers\), TS7, change plates have to be ordered separately\. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler\. The special beam technology of the adapter makes it possible to comfortably cover textiles over the base plate\.
EAN:PIGU35288116
Secabo slide extension for LITE and SMART series incl\. 38x38cm base plate with beam adapter
The Secabo LITE and SMART series can now be converted into a convenient double-plate transfer press with the Secabo slide\. The stable slide can be screwed to the transfer press in just a few simple steps\. The Slide is based on the well-known Secabo quick-change principle and can be pushed into the respective end positions on the left and right with little effort\. The delivery includes a 38x38cm base plate and two beam adapters so that the original base plates of the transfer press can continue to be used\. Furthermore, all removable plates in the range fit on the slide\. These are available separately and can be fitted and removed in seconds\. Available for the transfer presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART\.
EAN:PIGU35288116
Secabo slide extension for LITE and SMART series incl\. 40x50cm base plate with beam adapter
The Secabo LITE and SMART series can now be converted into a convenient double-plate transfer press with the Secabo slide\. The stable slide can be screwed to the transfer press in just a few simple steps\. The Slide is based on the well-known Secabo quick-change principle and can be pushed into the respective end positions on the left and right with little effort\. A 40x50cm base plate and two beam adapters are included in the delivery, so that the original base plates of the transfer press can continue to be used\. Furthermore, all removable plates in the range fit on the slide\. These are available separately and can be fitted and removed in seconds\. Available for the transfer presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART\.
EAN:PIGU35288116
Secabo Slide extension for LITE and SMART series
The Secabo LITE and SMART series can now be converted into a convenient double-plate transfer press with the Secabo slide\. The stable slide can be screwed to the transfer press in just a few steps\. The Slide is based on the well-known Secabo quick-change principle and can be pushed into the respective end positions on the left and right with little effort\. A beam adapter is included in the delivery so that the original base plate of the transfer press can continue to be used\. Furthermore, all removable plates in the range fit on the slide\. These are available separately and can be installed and removed in seconds\. Available for the transfer presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART\.
EAN:PIGU35288116
Secabo slide extension for TC5
The Secabo TC5 and TC7 folding presses can now be converted to a convenient double-plate transfer press with the Secabo slide\. The stable slide is screwed to the transfer press in a few easy steps\. The slide is based on the well-known Secabo quickcoupler principle and can be pushed into the respective end positions on the left and right of the handle with little effort\. Included in the delivery is a beam adapter to continue using the original base plate of the transfer press\. In addition, all removable plates in the range fit on the slide\. These are available separately and can be mounted and removed in seconds\.
EAN:PIGU35288116
Secabo slide extension for TC7
The Secabo TC5 and TC7 folding presses can now be converted to a convenient double-plate transfer press with the Secabo slide\. The stable slide is screwed to the transfer press in a few easy steps\. The slide is based on the well-known Secabo quickcoupler principle and can be pushed into the respective end positions on the left and right of the handle with little effort\. Included in the delivery is a beam adapter to continue using the original base plate of the transfer press\. In addition, all removable plates in the range fit on the slide\. These are available separately and can be mounted and removed in seconds\.
EAN:PIGU35288116