Paldiski mnt.26A, Tallinn
+372 50 64 135
Lomond Premium Photo Paper Super Glossy 260 g/m2 A4, 20 sheets, Bright
14,72 €
7 in stock
Lomond Premium Photo Inkjet Paper Super Glossy 260 g/m2 A4/20 Bright
Microporous super glossy medium density photo paper. For printing highest quality images with resolution up to 5760 dpi. Compatible with dye-based and pigment inks.
Lomond Premium Photo Paper is recommended for professional photographers, designers and painters. Due to microporous coating, the paper provides resolution up to 5760 dpi.
The paper is compatible with both dye-based and pigment inks. The ink perfectly absorbs and dries immediately.
The paper provides the same high quality of printing as traditional photo paper does. Because of the polyester coating, Lomond Premium Photo paper is absolutely safe from curling, as it comes out of a printer, even when the ink “flow” is very intensive. The quality of images is absolutely perfect and they are resistant to moisture and ultraviolet.
Super Glossy Premium Photo Paper is closer to the traditional glossy papers used for photo printing by means of the chemicals.
| Weight | 0,400 kg |
|---|---|
| Dimensions | 215,000 × 10,000 × 320,000 cm |
| Бренд |
Related products
Koopiapaber A4 80g/m2, 2500 lehte
STANGER Disinfectant Cleaner for hands and surfaces Disinfectant Cleaner, 200 ml 3 pcs
STANGER Disinfectant Cleaner for hands and surfaces Disinfectant Cleaner, 200 ml 3 pcs
Rapid disinfectant cleaner removes effectively bacteria, yeasts,
fungi and viruses on surfaces\. Spread the cleaner carefully on the area
to be cleaned\. DGHM VII certified\.
Contains biocidal products 70% ethanol 642\. 0\.03 % hydrogen peroxide \(WHO-Recomendation\)
Shelf life 3 years when stored corectly\.
Approval number:
ChemBiozidMeldeV
N-87506
Biodegradable\.
Tindipea puhastusvedelik OCP “Nozzle Rocket”, 250 ml
Liquid is designed for unclogging \(internal rinsing\) of ink cartridges\. Its specially working out chemical composition allows to remove \(dissolve\) very precisely the reminders of dry ink from the cartridge\.
This liquid is an auxiliary liquid and should be used jointly with
OCP
internal yellow liquid\. Simply -
Nozzle Rocket
removes all the dry ink remainders which wasn't dissolved after use of yellow liquid\. Use
Nozzle Rocket
liquid only injecting it inside the cartridge\. We receive the best effectiveness when liquid will be heated to temperature
55 °C
\. It is very important not to cross that temperature! Because the electronic plates are stuck, too large temperature of solution may cause plates unstick and also cartridge electronic damage\. Injecting liquid inside the cartridge it is necessary to remember to suck off using syringe with suction device through the exhaust nozzles \(alternatively using specialist suction device\)\.
ATTENTION
: We receive the largest effectiveness when the liquid is heated to
55 °C
\. Don´t cross that temperature! After cartridge rinsing with
Nozzle Rocket
liquid, it is recommended removing liquid reminders injecting inside the cartridge distilled water and removing reminders sucking it off through exhaust nozzles\.